I installed a new hard drive that will be used for additional storage only. I have followed these instructions on Ubuntu pages to partition it, but when I follow the instructions to automatically mount it, I get lost. It tells me to enter a new line in fstab but when I enter the line, there is no way to press enter and confirm. I also see it says something about using uuid but that link is no help either.

The output of sudo fdisk -l:

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.





Disk /dev/sda: 250.1 GB, 250059350016 bytes

255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x00000000



    Device Boot      Start         End      Blocks   Id  System

/dev/sda1               1   488397167   244198583+  ee  GPT



Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes

255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk identifier: 0x00034d6c



   Device Boot      Start         End      Blocks   Id  System

/dev/sdb1            2048  1953523711   976760832   83  Linux

sudo blkid:

/dev/sda1: UUID="9EDD-FADC" TYPE="vfat" 

/dev/sda2: UUID="f45d9121-db97-4b97-bdf1-6db2ceaaa3b6" TYPE="ext4" 

/dev/sda3: UUID="f908decc-66cd-41ec-a588-7df965077dea" TYPE="swap" 

/dev/sdb1: UUID="4dfbef06-0f1a-4ec4-a637-0ea911e656ba" TYPE="ext4" 

cat etc/fstab:

# /etc/fstab: static file system information.

#

# Use 'blkid' to print the universally unique identifier for a

# device; this may be used with UUID= as a more robust way to name devices

# that works even if disks are added and removed. See fstab(5).

#

# <file system> <mount point>   <type>  <options>       <dump>  <pass>

# / was on /dev/sda2 during installation

UUID=f45d9121-db97-4b97-bdf1-6db2ceaaa3b6 /               ext4    errors=remount-ro 0       1

# /boot/efi was on /dev/sda1 during installation

UUID=9EDD-FADC  /boot/efi       vfat    defaults        0       1

# swap was on /dev/sda3 during installation

UUID=f908decc-66cd-41ec-a588-7df965077dea none            swap    sw              0       0

UUID=4dfbef06-0f1a-4ec4-a637-0ea911e656ba /media/micah/new_hd ext4 defaults 0 2