The max I can set my resolution currently is 1024x768, but my laptop's native resolution is 1920x1080. I've always been able to set it to 1920x1080 without issue, but since I broke my video driver (I installed 'nvidia-current' which broke my display, see this thread) I haven't been able to get above the aforementioned 1024x768.
I've tried the instructions from this thread and this wiki but haven't made any progress.
Video Card:
travis@travis-ThinkPad-W510:~$ lscpi |grep VGA
01:00.0 VGA compatible controller: NVIDIA Corporation GT216GLM [Quadro FX 880M] (rev a2)
Output for 'xrandr'
travis@travis-ThinkPad-W510:~$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 61.0*
800x600 61.0
848x480 0.0
640x480 60.0
Any suggestions?
Method used for trying to create '--newmode'
travis@travis-ThinkPad-W510:~$ cvt 1920 1080
# 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
travis@travis-ThinkPad-W510:~$ xrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
xrandr: Failed to get size of gamma for output default
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 16 (RRCreateMode)
Serial number of failed request: 19
Current serial number in output stream: 19