I am combining an usb sound card with a cubieboard2, within a head casing containing two microphones! Binaural microphone! Thats just the basic jist at least ;p

I am currently using Lubuntu 12.10 v1.05 a20 nand image. My goal here is to load alsa-firmware into a Tascam US122 usb audio interface(test unit) While we wait for our own designed sound card to be completed!

I am specifically having an issue with usx2yloader within alsa-firmware. At least I THINK that is the problem! This same process worked perfect on my desktop ubuntu install. I am following this guide Tascam US122 ubuntu community. The guide is slightly old, as far as the old firmware and link go, but I have worked out that problem already.

Remember this is all using Lubuntu Cubieboard2 a20 image! This is NOT i386 compatible! Armhf please =D

So... After I run this command, with the proper paths, the firmware loads into the Tascam.

$ sudo fxload -s /path/to/ld2-ezusb.hex -I /usr/share/alsa/firmware/usx2yloader/us122fw.ihx -D /proc/bus/usb/002/003

After this I am supposed to run usx2yloader but I get this error.

$ sudo usx2yloader

sudo: usx2yloader: command not found

I know this looks like a simple fix but it is a lot harder than I could have forseen! As far as I know, you cant just simply install or sudo apt-get install usx2yloader. I have tried to just extract alsa-firmare, cd /usx2yloader and make doesnt work.

$ make

make: Nothing to be done for `all'.

I will install alsa-firmware now and give you the output. Please keep in mind that my alsa install is currently 1.0.25 so i normally would get the alsa-firmware that matches it. Note: I have tried several different alfa-firmware packages such as 1.0.27(current), 1.0.25(same as my Lubuntu installed alsa and alsa-tools) and 1.0.16(the same as my ubuntu desktop install, which was successfull and the Tascam is currently on with a solid green light). For examples sake, I will install 1.0.27(current)

configure

linaro@cubieboard2:~/Downloads/alsa-firmware-1.0.27$ ./configure

checking for a BSD-compatible install... /usr/bin/install -c

checking whether build environment is sane... yes

checking for a thread-safe mkdir -p... /bin/mkdir -p

checking for gawk... no

checking for mawk... mawk

checking whether make sets $(MAKE)... yes

checking for gcc... gcc

checking whether the C compiler works... yes

checking for C compiler default output file name... a.out

checking for suffix of executables... 

checking whether we are cross compiling... no

checking for suffix of object files... o

checking whether we are using the GNU C compiler... yes

checking whether gcc accepts -g... yes

checking for gcc option to accept ISO C89... none needed

checking for style of include used by make... GNU

checking dependency style of gcc... gcc3

checking whether ln -s works... yes

checking how to run the C preprocessor... gcc -E

checking for grep that handles long lines and -e... /bin/grep

checking for egrep... /bin/grep -E

checking for ANSI C header files... yes

checking for as31... no

checking firmware installation directory... /lib/firmware

checking that generated files are newer than configure... done

configure: creating ./config.status

config.status: creating Makefile

config.status: creating hdsploader/Makefile

config.status: creating mixartloader/Makefile

config.status: creating usx2yloader/Makefile

config.status: creating vxloader/Makefile

config.status: creating pcxhrloader/Makefile

config.status: creating echoaudio/Makefile

config.status: creating emu/Makefile

config.status: creating asihpi/Makefile

config.status: creating korg1212/Makefile

config.status: creating maestro3/Makefile

config.status: creating multisound/Makefile

config.status: creating sb16/Makefile

config.status: creating wavefront/Makefile

config.status: creating ymfpci/Makefile

config.status: creating aica/Makefile

config.status: creating ca0132/Makefile

config.status: executing depfiles commands

make

linaro@cubieboard2:~/Downloads/alsa-firmware-1.0.27$ make

Making all in hdsploader

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/hdsploader'

gcc -DPACKAGE_NAME="" -DPACKAGE_TARNAME="" -DPACKAGE_VERSION="" -                    DPACKAGE_STRING="" -DPACKAGE_BUGREPORT="" -DPACKAGE_URL="" -DPACKAGE="alsa-    firmware" -DVERSION="1.0.27" -DSTDC_HEADERS=1 -I.     -g -O2 -MT tobin.o -MD -MP -MF         .deps/tobin.Tpo -c -o tobin.o tobin.c

mv -f .deps/tobin.Tpo .deps/tobin.Po

gcc  -g -O2   -o tobin tobin.o  

./tobin

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/hdsploader'

Making all in mixartloader

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/mixartloader'

make[1]: Nothing to be done for `all'.

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/mixartloader'

Making all in pcxhrloader

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/pcxhrloader'

make[1]: Nothing to be done for `all'.

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/pcxhrloader'

Making all in usx2yloader

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader'

make[1]: Nothing to be done for `all'.

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader'

Making all in vxloader

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/vxloader'

gcc -DPACKAGE_NAME="" -DPACKAGE_TARNAME="" -DPACKAGE_VERSION="" -DPACKAGE_STRING="" -DPACKAGE_BUGREPORT="" -DPACKAGE_URL="" -DPACKAGE="alsa-firmware" -DVERSION="1.0.27" -DSTDC_HEADERS=1 -I.     -g -O2 -MT toxlx.o -MD -MP -MF         .deps/toxlx.Tpo -c -o toxlx.o toxlx.c

mv -f .deps/toxlx.Tpo .deps/toxlx.Po

gcc  -g -O2   -o toxlx toxlx.o  

./toxlx < x1_2_v22.rbt > x1_2_v22.xlx

./toxlx < x1_1_vx2.rbt > x1_1_vx2.xlx

./toxlx < x1_1_vxp.rbt > x1_1_vxp.xlx

./toxlx < x1_1_vp4.rbt > x1_1_vp4.xlx

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/vxloader'

Making all in echoaudio

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/echoaudio'

gcc -DPACKAGE_NAME="" -DPACKAGE_TARNAME="" -DPACKAGE_VERSION="" -    DPACKAGE_STRING="" -DPACKAGE_BUGREPORT="" -DPACKAGE_URL="" -DPACKAGE="alsa-    firmware" -DVERSION="1.0.27" -DSTDC_HEADERS=1 -I.     -g -O2 -MT fw_writer.o -MD -MP -    MF .deps/fw_writer.Tpo -c -o fw_writer.o fw_writer.c

mv -f .deps/fw_writer.Tpo .deps/fw_writer.Po

gcc  -g -O2   -o fw_writer fw_writer.o  

./fw_writer DSP/LoaderDSP.c loader_dsp.fw

./fw_writer DSP/Darla20DSP.c darla20_dsp.fw

./fw_writer DSP/Gina20DSP.c gina20_dsp.fw

./fw_writer DSP/Layla20DSP.c layla20_dsp.fw

./fw_writer ASIC/LaylaASIC.c layla20_asic.fw

./fw_writer DSP/Darla24DSP.c darla24_dsp.fw

./fw_writer DSP/Gina24DSP.c gina24_301_dsp.fw

./fw_writer ASIC/Gina24ASIC.c gina24_301_asic.fw

./fw_writer DSP/Gina24_361DSP.c gina24_361_dsp.fw

./fw_writer ASIC/Gina24ASIC_361.c gina24_361_asic.fw

./fw_writer DSP/Layla24DSP.c layla24_dsp.fw

./fw_writer ASIC/Layla24_1ASIC.c layla24_1_asic.fw

./fw_writer ASIC/Layla24_2A_ASIC.c layla24_2A_asic.fw

./fw_writer ASIC/Layla24_2S_ASIC.c layla24_2S_asic.fw

./fw_writer DSP/MonaDSP.c mona_301_dsp.fw

./fw_writer ASIC/Mona1ASIC48.c mona_301_1_asic_48.fw

./fw_writer ASIC/Mona1ASIC96.c mona_301_1_asic_96.fw

./fw_writer DSP/Mona361DSP.c mona_361_dsp.fw

./fw_writer ASIC/Mona1ASIC48_361.c mona_361_1_asic_48.fw

./fw_writer ASIC/Mona1ASIC96_361.c mona_361_1_asic_96.fw

./fw_writer ASIC/Mona2ASIC.c mona_2_asic.fw

./fw_writer DSP/MiaDSP.c mia_dsp.fw

./fw_writer DSP/Echo3gDSP.c echo3g_dsp.fw

./fw_writer ASIC/3G_ASIC.c 3g_asic.fw

./fw_writer DSP/IndigoDSP.c indigo_dsp.fw

./fw_writer DSP/IndigoIODSP.c indigo_io_dsp.fw

./fw_writer DSP/IndigoIOxDSP.c indigo_iox_dsp.fw

./fw_writer DSP/IndigoDJDSP.c indigo_dj_dsp.fw

./fw_writer DSP/IndigoDJxDSP.c indigo_djx_dsp.fw

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/echoaudio'

Making all in asihpi

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/asihpi'

make[1]: Nothing to be done for `all'.

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/asihpi'

Making all in emu

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/emu'

gcc -DPACKAGE_NAME="" -DPACKAGE_TARNAME="" -DPACKAGE_VERSION="" -    DPACKAGE_STRING="" -DPACKAGE_BUGREPORT="" -DPACKAGE_URL="" -DPACKAGE="alsa-    firmware" -DVERSION="1.0.27" -DSTDC_HEADERS=1 -I.     -g -O2 -MT fw_writer.o -MD -MP -    MF .deps/fw_writer.Tpo -c -o fw_writer.o fw_writer.c

mv -f .deps/fw_writer.Tpo .deps/fw_writer.Po

gcc  -g -O2   -o fw_writer fw_writer.o  

./fw_writer

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/emu'

Making all in korg1212

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/korg1212'

make[1]: Nothing to be done for `all'.

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/korg1212'

Making all in maestro3

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/maestro3'

gcc -DPACKAGE_NAME="" -DPACKAGE_TARNAME="" -DPACKAGE_VERSION="" -        DPACKAGE_STRING="" -DPACKAGE_BUGREPORT="" -DPACKAGE_URL="" -DPACKAGE="alsa-    firmware" -DVERSION="1.0.27" -DSTDC_HEADERS=1 -I.     -g -O2 -MT fw_writer.o -MD -MP -    MF .deps/fw_writer.Tpo -c -o fw_writer.o fw_writer.c

mv -f .deps/fw_writer.Tpo .deps/fw_writer.Po

gcc  -g -O2   -o fw_writer fw_writer.o  

./fw_writer

writing maestro3_assp_kernel.fw ...

writing maestro3_assp_minisrc.fw ...

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/maestro3'

Making all in multisound

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/multisound'

make[1]: Nothing to be done for `all'.

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/multisound'

Making all in sb16

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/sb16'

gcc -DPACKAGE_NAME="" -DPACKAGE_TARNAME="" -DPACKAGE_VERSION="" -    DPACKAGE_STRING="" -DPACKAGE_BUGREPORT="" -DPACKAGE_URL="" -DPACKAGE="alsa-    firmware" -DVERSION="1.0.27" -DSTDC_HEADERS=1 -I.     -g -O2 -MT fw_writer.o -MD -MP -    MF .deps/fw_writer.Tpo -c -o fw_writer.o fw_writer.c

mv -f .deps/fw_writer.Tpo .deps/fw_writer.Po

gcc  -g -O2   -o fw_writer fw_writer.o  

./fw_writer

writing mulaw_main.csp ...

writing alaw_main.csp ...

writing ima_adpcm_init.csp ...

writing ima_adpcm_playback.csp ...

writing ima_adpcm_capture.csp ...

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/sb16'

Making all in wavefront

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/wavefront'

gcc -DPACKAGE_NAME="" -DPACKAGE_TARNAME="" -DPACKAGE_VERSION="" -    DPACKAGE_STRING="" -DPACKAGE_BUGREPORT="" -DPACKAGE_URL="" -DPACKAGE="alsa-        firmware" -DVERSION="1.0.27" -DSTDC_HEADERS=1 -I.     -g -O2 -MT fw_writer.o -MD -MP -    MF .deps/fw_writer.Tpo -c -o fw_writer.o fw_writer.c

mv -f .deps/fw_writer.Tpo .deps/fw_writer.Po

gcc  -g -O2   -o fw_writer fw_writer.o  

./fw_writer

writing yss225_registers.bin ...

    make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-    1.0.27/wavefront'

Making all in ymfpci

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/ymfpci'

gcc -DPACKAGE_NAME="" -DPACKAGE_TARNAME="" -DPACKAGE_VERSION="" -    DPACKAGE_STRING="" -DPACKAGE_BUGREPORT="" -DPACKAGE_URL="" -DPACKAGE="alsa-        firmware" -DVERSION="1.0.27" -DSTDC_HEADERS=1 -I.     -g -O2 -MT fw_writer.o -MD -MP -    MF .deps/fw_writer.Tpo -c -o fw_writer.o fw_writer.c

mv -f .deps/fw_writer.Tpo .deps/fw_writer.Po

gcc  -g -O2   -o fw_writer fw_writer.o  

./fw_writer

writing ds1_dsp.fw ...

writing ds1_ctrl.fw ...

writing ds1e_ctrl.fw ...

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/ymfpci'

Making all in aica

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/aica'

make[1]: Nothing to be done for `all'.

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/aica'

Making all in ca0132

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/ca0132'

make[1]: Nothing to be done for `all'.

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/ca0132'

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27'

make[1]: Nothing to be done for `all-am'.

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27'

I noticed this line when doing make above. This should be installing right? I think this is where my problem lies...!

Making all in usx2yloader

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader'

make[1]: Nothing to be done for `all'.

make install

linaro@cubieboard2:~/Downloads/alsa-firmware-1.0.27$ sudo make install

Making install in hdsploader

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/hdsploader'

make[2]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/hdsploader'

make[2]: Nothing to be done for `install-exec-am'.

 /bin/mkdir -p '/usr/local/share/alsa/firmware/hdsploader'

 /usr/bin/install -c -m 644 digiface_firmware.bin digiface_firmware_rev11.bin     multiface_firmware.bin multiface_firmware_rev11.bin rpm_firmware.bin     '/usr/local/share/alsa/firmware/hdsploader'

 /bin/mkdir -p '/lib/firmware'

 /usr/bin/install -c -m 644 digiface_firmware.bin digiface_firmware_rev11.bin     multiface_firmware.bin multiface_firmware_rev11.bin rpm_firmware.bin '/lib/firmware'

make[2]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/hdsploader'

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/hdsploader'

Making install in mixartloader

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-    1.0.27/mixartloader'

make[2]: Entering directory `/home/linaro/Downloads/alsa-firmware-    1.0.27/mixartloader'

make[2]: Nothing to be done for `install-exec-am'.

 /bin/mkdir -p '/usr/local/share/alsa/firmware/mixartloader'

 /usr/bin/install -c -m 644 miXart.conf miXart8AES.xlx miXart8.elf miXart8.xlx     '/usr/local/share/alsa/firmware/mixartloader'

 /bin/mkdir -p '/lib/firmware/mixart'

 /usr/bin/install -c -m 644 miXart8AES.xlx miXart8.elf miXart8.xlx     '/lib/firmware/mixart'

make[2]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/mixartloader'

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/mixartloader'

Making install in pcxhrloader

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/pcxhrloader'

make[2]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/pcxhrloader'

make[2]: Nothing to be done for `install-exec-am'.

 /bin/mkdir -p '/usr/local/share/alsa/firmware/pcxhrloader'

 /usr/bin/install -c -m 644 pcxhr.conf pcxhr0.conf pcxhr1.conf pcxhr2.conf         pcxhr3.conf pcxhr4.conf pcxhr5.conf xi_1_882.dat xc_1_882.dat e321_512.e56 b321_512.b56         d321_512.d56 xlxint.dat xlxc882hr.dat xlxc882e.dat dspe882.e56 dspb882hr.b56 dspb882e.b56         dspd882.d56 xlxc1222hr.dat xlxc1222e.dat dspb1222hr.b56 dspb1222e.b56 dspd1222.d56         xlxc222.dat xlxc924.dat dspe924.e56 dspb924.b56 dspd222.d56         '/usr/local/share/alsa/firmware/pcxhrloader'

     /bin/mkdir -p '/lib/firmware/pcxhr'

         /usr/bin/install -c -m 644 xi_1_882.dat xc_1_882.dat e321_512.e56     b321_512.b56     d321_512.d56 xlxint.dat xlxc882hr.dat xlxc882e.dat dspe882.e56 dspb882hr.b56 dspb882e.b56     dspd882.d56 xlxc1222hr.dat xlxc1222e.dat dspb1222hr.b56 dspb1222e.b56 dspd1222.d56     xlxc222.dat xlxc924.dat dspe924.e56 dspb924.b56 dspd222.d56 '/lib/firmware/pcxhr'

make[2]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/pcxhrloader'

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/pcxhrloader'

Making install in usx2yloader

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader'

make[2]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader'

 /bin/mkdir -p '/usr/local/share/alsa/firmware/usx2yloader'

 /usr/bin/install -c -m 644 us122.conf us224.conf us428.conf us122.prepad     us224.prepad us428.prepad us122.rbt us224.rbt us428.rbt tascam_loader.ihx us122fw.ihx     us224fw.ihx us428fw.ihx '/usr/local/share/alsa/firmware/usx2yloader'

make[2]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader'

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader'

Making install in vxloader

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/vxloader'

make[2]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/vxloader'

make[2]: Nothing to be done for `install-exec-am'.

 /bin/mkdir -p '/usr/local/share/alsa/firmware/vxloader'

 /usr/bin/install -c -m 644 vx222.conf vxboard.conf vxpocket.conf vxp440.conf     bd56002.boot bd563s3.boot bd563v2.boot bx_1_vxp.b56 bx_1_vp4.b56 l_1_v22.d56 l_1_vx2.d56     l_1_vxp.d56 l_1_vp4.d56 x1_2_v22.rbt x1_1_vx2.rbt x1_1_vxp.rbt x1_1_vp4.rbt     '/usr/local/share/alsa/firmware/vxloader'

 /bin/mkdir -p '/lib/firmware/vx'

 /usr/bin/install -c -m 644 bd56002.boot bd563s3.boot bd563v2.boot bx_1_vxp.b56     bx_1_vp4.b56 l_1_v22.d56 l_1_vx2.d56 l_1_vxp.d56 l_1_vp4.d56 x1_2_v22.xlx x1_1_vx2.xlx     x1_1_vxp.xlx x1_1_vp4.xlx '/lib/firmware/vx'

make[2]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/vxloader'

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/vxloader'

Making install in echoaudio

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/echoaudio'

make[2]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/echoaudio'

make[2]: Nothing to be done for `install-exec-am'.

 /bin/mkdir -p '/lib/firmware/ea'

 /usr/bin/install -c -m 644 loader_dsp.fw darla20_dsp.fw gina20_dsp.fw layla20_dsp.fw     layla20_asic.fw darla24_dsp.fw gina24_301_dsp.fw gina24_301_asic.fw gina24_361_dsp.fw     gina24_361_asic.fw layla24_dsp.fw layla24_1_asic.fw layla24_2A_asic.fw layla24_2S_asic.fw     mona_301_dsp.fw mona_301_1_asic_48.fw mona_301_1_asic_96.fw mona_361_dsp.fw     mona_361_1_asic_48.fw mona_361_1_asic_96.fw mona_2_asic.fw mia_dsp.fw echo3g_dsp.fw     3g_asic.fw indigo_dsp.fw indigo_io_dsp.fw indigo_iox_dsp.fw indigo_dj_dsp.fw     indigo_djx_dsp.fw '/lib/firmware/ea'

make[2]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/echoaudio'

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/echoaudio'

    Making install in asihpi

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/asihpi'

make[2]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/asihpi'

make[2]: Nothing to be done for `install-exec-am'.

 /bin/mkdir -p '/lib/firmware/asihpi'

 /usr/bin/install -c -m 644 dsp2400.bin dsp5000.bin dsp6200.bin dsp6205.bin     dsp6400.bin dsp6600.bin dsp8700.bin dsp8900.bin '/lib/firmware/asihpi'

    make[2]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/asihpi'

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/asihpi'

Making install in emu

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/emu'

make[2]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/emu'

make[2]: Nothing to be done for `install-exec-am'.

 /bin/mkdir -p '/lib/firmware/emu'

 /usr/bin/install -c -m 644 hana.fw audio_dock.fw emu0404.fw micro_dock.fw     emu1010_notebook.fw emu1010b.fw '/lib/firmware/emu'

make[2]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/emu'

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/emu'

Making install in korg1212

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/korg1212'

make[2]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/korg1212'

make[2]: Nothing to be done for `install-exec-am'.

 /bin/mkdir -p '/lib/firmware/korg'

 /usr/bin/install -c -m 644 k1212.dsp '/lib/firmware/korg'

make[2]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/korg1212'

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/korg1212'

Making install in maestro3

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/maestro3'

    make[2]: Entering directory `/home/linaro/Downloads/alsa-firmware-    1.0.27/maestro3'

make[2]: Nothing to be done for `install-exec-am'.

 /bin/mkdir -p '/lib/firmware/ess'

 /usr/bin/install -c -m 644 maestro3_assp_kernel.fw maestro3_assp_minisrc.fw     '/lib/firmware/ess'

make[2]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/maestro3'

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/maestro3'

Making install in multisound

    make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-    1.0.27/multisound'

make[2]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/multisound'

make[2]: Nothing to be done for `install-exec-am'.

make  install-data-hook

make[3]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/multisound'

/usr/bin/install -c -d /lib/firmware/turtlebeach

cd /lib/firmware/turtlebeach && 

rm -f msndinit.bin && 

ln -s /etc/sound/msndinit.bin msndinit.bin

cd /lib/firmware/turtlebeach && 

      rm -f msndperm.bin && 

      ln -s /etc/sound/msndperm.bin msndperm.bin

cd /lib/firmware/turtlebeach && 

      rm -f pndspini.bin && 

      ln -s /etc/sound/pndspini.bin pndspini.bin

cd /lib/firmware/turtlebeach && 

      rm -f pndsperm.bin && 

      ln -s /etc/sound/pndsperm.bin pndsperm.bin

make[3]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/multisound'

make[2]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/multisound'

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/multisound'

Making install in sb16

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/sb16'

make[2]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/sb16'

make[2]: Nothing to be done for `install-exec-am'.

 /bin/mkdir -p '/lib/firmware/sb16'

 /usr/bin/install -c -m 644 mulaw_main.csp alaw_main.csp ima_adpcm_init.csp         ima_adpcm_playback.csp ima_adpcm_capture.csp '/lib/firmware/sb16'

make[2]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/sb16'

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/sb16'

Making install in wavefront

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/wavefront'

make[2]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/wavefront'

make[2]: Nothing to be done for `install-exec-am'.

 /bin/mkdir -p '/lib/firmware/yamaha'

 /usr/bin/install -c -m 644 yss225_registers.bin '/lib/firmware/yamaha'

make[2]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/wavefront'

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/wavefront'

Making install in ymfpci

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/ymfpci'

make[2]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/ymfpci'

make[2]: Nothing to be done for `install-exec-am'.

 /bin/mkdir -p '/lib/firmware/yamaha'

 /usr/bin/install -c -m 644 ds1_dsp.fw ds1_ctrl.fw ds1e_ctrl.fw     '/lib/firmware/yamaha'

make[2]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/ymfpci'

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/ymfpci'

Making install in aica

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/aica'

make[2]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/aica'

make[2]: Nothing to be done for `install-exec-am'.

 /bin/mkdir -p '/lib/firmware'

 /usr/bin/install -c -m 644 aica_firmware.bin '/lib/firmware'

make[2]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/aica'

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/aica'

Making install in ca0132

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/ca0132'

make[2]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27/ca0132'

make[2]: Nothing to be done for `install-exec-am'.

 /bin/mkdir -p '/lib/firmware'

 /usr/bin/install -c -m 644 ctefx.bin ctspeq.bin '/lib/firmware'

make[2]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/ca0132'

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27/ca0132'

make[1]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27'

make[2]: Entering directory `/home/linaro/Downloads/alsa-firmware-1.0.27'

make[2]: Nothing to be done for `install-exec-am'.

make[2]: Nothing to be done for `install-data-am'.

make[2]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27'

make[1]: Leaving directory `/home/linaro/Downloads/alsa-firmware-1.0.27'

This is what comes up when I locate usx2yloader. I am searching for /usr/bin/usx2yloader or /usr/sbin/usx2yloader.

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader/Makefile

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader/Makefile.am

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader/Makefile.in

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader/README

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader/an2131.asm

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader/tascam_loader.asm

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader/tascam_loader.ihx

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader/us122.conf

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader/us122.prepad

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader/us122.rbt

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader/us122fw.ihx

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader/us224.conf

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader/us224.prepad

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader/us224.rbt

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader/us224fw.ihx

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader/us428.conf

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader/us428.prepad

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader/us428.rbt

/home/linaro/Downloads/alsa-firmware-1.0.27/usx2yloader/us428fw.ihx

/usr/local/share/alsa/firmware/usx2yloader

/usr/local/share/alsa/firmware/usx2yloader/tascam_loader.ihx

/usr/local/share/alsa/firmware/usx2yloader/us122.conf

/usr/local/share/alsa/firmware/usx2yloader/us122.prepad

/usr/local/share/alsa/firmware/usx2yloader/us122.rbt

/usr/local/share/alsa/firmware/usx2yloader/us122fw.ihx

/usr/local/share/alsa/firmware/usx2yloader/us224.conf

/usr/local/share/alsa/firmware/usx2yloader/us224.prepad

/usr/local/share/alsa/firmware/usx2yloader/us224.rbt

/usr/local/share/alsa/firmware/usx2yloader/us224fw.ihx

/usr/local/share/alsa/firmware/usx2yloader/us428.conf

/usr/local/share/alsa/firmware/usx2yloader/us428.prepad

/usr/local/share/alsa/firmware/usx2yloader/us428.rbt

/usr/local/share/alsa/firmware/usx2yloader/us428fw.ihx

/usr/share/alsa/firmware/usx2yloader

/usr/share/alsa/firmware/usx2yloader/tascam_loader.ihx

/usr/share/alsa/firmware/usx2yloader/us122.conf

/usr/share/alsa/firmware/usx2yloader/us122.prepad

/usr/share/alsa/firmware/usx2yloader/us122.rbt

/usr/share/alsa/firmware/usx2yloader/us122fw.ihx

/usr/share/alsa/firmware/usx2yloader/us224.conf

/usr/share/alsa/firmware/usx2yloader/us224.prepad

/usr/share/alsa/firmware/usx2yloader/us224.rbt

/usr/share/alsa/firmware/usx2yloader/us224fw.ihx

/usr/share/alsa/firmware/usx2yloader/us428.conf

/usr/share/alsa/firmware/usx2yloader/us428.prepad

/usr/share/alsa/firmware/usx2yloader/us428.rbt

/usr/share/alsa/firmware/usx2yloader/us428fw.ihx

This is all the info I can think of! If you have anything that can help it will be greatly appreciated!!

Thanks for your help in advance guys and gals!!

-Halfhead