I'm using Ubuntu 12.04. Up until minutes ago XSensors was working fine. I had to restart due to some updates and it stopped working. By that I mean that it only displays one temperature (the other tab is just blank):

Here is my the output from $ sensors, to show that there is other data being detected:

k10temp-pci-00c3

Adapter: PCI adapter

temp1:        +27.2°C  (high = +70.0°C)

                       (crit = +90.0°C, hyst = +87.0°C)



fam15h_power-pci-00c4

Adapter: PCI adapter

power1:      115.97 W  (crit = 124.77 W)



it8720-isa-0228

Adapter: ISA adapter

in0:          +1.41 V  (min =  +0.00 V, max =  +4.08 V)

in1:          +1.47 V  (min =  +0.00 V, max =  +4.08 V)

in2:          +3.38 V  (min =  +0.00 V, max =  +4.08 V)

+5V:          +2.94 V  (min =  +0.00 V, max =  +4.08 V)

in4:          +3.06 V  (min =  +0.00 V, max =  +4.08 V)

in5:          +2.91 V  (min =  +0.00 V, max =  +4.08 V)

in6:          +4.08 V  (min =  +0.00 V, max =  +4.08 V)  ALARM

5VSB:         +2.96 V  (min =  +0.00 V, max =  +4.08 V)

Vbat:         +3.17 V  

fan1:        2136 RPM  (min =    0 RPM)

fan2:         724 RPM  (min =    0 RPM)

fan3:        1318 RPM  (min =    0 RPM)

fan4:        1094 RPM  (min =    0 RPM)

temp1:        +34.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor

temp2:        +42.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermal diode

temp3:        +39.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermal diode

cpu0_vid:    +0.000 V

intrusion0:  ALARM

Any ideas?