Question

5

How to get apache to serve a site via VirtualBox?

rated 0 times [ 5] [ 0] / answers: 1 / hits: 39971 / 2 Years ago, tue, march 8, 2022, 12:42:06

This tutorial taught me how to create an Ubuntu Server (12.10, 64-bit) VM in VirtualBox on a Windows 7 host machine, install Apache and have it serve a site from a dummy domain accessible via the host machine's browser.

It took a day and many attempts (although it seemed I was following the instructions as they were laid out, I was always doing something wrong) and I'd finally done it.

I find Ubuntu as a much seamless development environment than Windows, and so I wanted to same thing on Ubuntu. So, this time, I created an Ubuntu Server VM in VirtualBox on Ubuntu host machine, installed Apache and configured it. But when I access the site via the dummy domain, I get the 'Server not found' error.

Yes, I did modify the /etc/hosts file just as mentioned in the tutorial (which is for Windows 7). But I couldn't get it to work. Don't know what's wrong. Anyone know what else I should be doing?

EDIT: If I am not clear enough, please ask. I am willing to clarify.

Answers

Only authorized users can answer the question. Please sign in first, or register a free account.

irtuallyefu

Add To Favorites

Follow

Total Points: 429

Total Questions: 97

Total Answers: 119

Location: Hong Kong

Member since Tue, Oct 19, 2021

3 Years ago

answered 2 Years ago arkcker · Accepted Answer

If you need to allow other machines in your physical network reach your VM or if the VM needs Internet access, use bridged networking. Otherwise, stick to host-only networking.

Stop your VM and open the settings for it in the VirtualBox (OSE) Manager

Go to the Network tab

Select the network mode at your choice (bridged networking or host-only)

If you want to use bridged networking, you've to select the right network adapter at Name: ____________. For wired connections, you'd select something named like eth0. Wireless connections are usually named wlan0 (the numbers may vary).

Save the settings

Start the Ubuntu VM

When up, you can gather the IP address by running:

sudo ifconfig

The output should look similar to this:

eth0      Link encap:Ethernet  HWaddr 08:00:27:f4:c3:7b  

          inet addr:192.168.1.4  Bcast:192.168.1.255  Mask:255.255.255.0

          inet6 addr: fe80::a00:27ff:fef4:c37b/64 Scope:Link

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          RX packets:20 errors:0 dropped:0 overruns:0 frame:0

          TX packets:25 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000 

          RX bytes:3244 (3.2 KB)  TX bytes:2512 (2.5 KB)



lo        Link encap:Local Loopback  

          inet addr:127.0.0.1  Mask:255.0.0.0

          inet6 addr: ::1/128 Scope:Host

          UP LOOPBACK RUNNING  MTU:16436  Metric:1

          RX packets:0 errors:0 dropped:0 overruns:0 frame:0

          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:0 

          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

In the above output, 192.168.1.4 (on the second line) is the IP address that can be used in your Ubuntu host system to access your VM.

Now open the hosts file in Ubuntu host machine:
```
sudo gedit /etc/hosts
```
(If you don't want to use gedit, replace the word with the name of your favorite editor. E.g. vim, nano.)

Once the file is open, add this line, and save it:
```
192.168.1.4   my-dummy-site.com
```

Open any browser on your host machine and go to my-dummy-site.com to access your website, served right from VirtualBox.

( Special thanks to @iSeth for the help. Entirely based on this answer, bit is NOT the same. )