I have a problem enabling USB 3.0 on my laptop
Some relevant info:

uname -a

Linux HP-ProBook-6570b 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

lspci -nnk

00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04)

Subsystem: Hewlett-Packard Company Device [103c:17ab]

00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)

Subsystem: Hewlett-Packard Company Device [103c:17ab]

Kernel driver in use: ehci_hcd

00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04)

Subsystem: Hewlett-Packard Company Device [103c:17ab]

Kernel driver in use: ehci_hcd

...

lsusb

Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub

Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 001 Device 003: ID 138a:003d Validity Sensors, Inc. 

Bus 001 Device 004: ID 0461:4dfe Primax Electronics, Ltd 

Bus 002 Device 003: ID 0a5c:21e1 Broadcom Corp.

dmesg

[    1.152273] usb usb1: >SerialNumber: 0000:00:1a.0

[    1.152342] hub 1-0:1.0: >USB hub found

[    1.152345] hub 1-0:1.0: >2 ports detected

[    1.152396] ehci_hcd 0000:00:1d.0: >setting latency timer to 64

[    1.152399] ehci_hcd 0000:00:1d.0: >EHCI Host Controller

[    1.152402] ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2

[    1.152419] ehci_hcd 0000:00:1d.0: >debug port 2

[    1.156304] ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported

[    1.156307] ehci_hcd 0000:00:1d.0: >irq 16, io mem 0xd4738000

[    1.168203] ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00

[    1.168225] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002

[    1.168228] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.168231] usb usb2: >Product: EHCI Host Controller

[    1.168247] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd

[    1.168248] usb usb2: >SerialNumber: 0000:00:1d.0

[    1.168309] hub 2-0:1.0: >USB hub found

[    1.168311] hub 2-0:1.0: >2 ports detected

[    1.168347] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    1.168356] uhci_hcd: USB Universal Host Controller Interface driver

[    1.168374] xhci_hcd 0000:00:14.0: >can't derive routing for PCI INT A

[    1.168375] xhci_hcd 0000:00:14.0: >PCI INT A: no GSI

[    1.168375] 

[    1.168391] xhci_hcd 0000:00:14.0: >setting latency timer to 64

[    1.168394] xhci_hcd 0000:00:14.0: >xHCI Host Controller

[    1.168397] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 3

[    1.168479] xhci_hcd 0000:00:14.0: >cache line size of 64 is not supported

[    1.168480] xhci_hcd 0000:00:14.0: >request interrupt 255 failed

[    1.168482] xhci_hcd 0000:00:14.0: >USB bus 3 deregistered

[    1.168493] xhci_hcd 0000:00:14.0: >can't derive routing for PCI INT A

[    1.168495] xhci_hcd 0000:00:14.0: >init 0000:00:14.0 fail, -22

[    1.168498] xhci_hcd: probe of 0000:00:14.0 failed with error -22

[    1.168517] usbcore: registered new interface driver libusual

One more thing this laptop runs in natve UEFI mode
Any idea how to solve this problem?