Question

1

System doesn't boot when ubuntu is installed on an SSD

rated 0 times [ 1] [ 0] / answers: 1 / hits: 13446 / 2 Years ago, sat, march 19, 2022, 1:24:26

I've recently discovered Ubuntu and decided to give it a try.
I am using a Samsung Series 5 p530u3c-ad1 which comes with a 24gb SSD and a ~500gb HDD, My intention is to set the system files to the ssd and the rest to the HDD.
The system works fine if I do a direct install using only the HDD, but if I try using the SSD for the system files the computer doesn't boot-up, I do not know if the SSD is being recognized by the computer, I think so because I could install Ubuntu on it, but it doesn't appear on the boot order or the boot menu.
I read some posts and tried using boot-repair which pointed me not to forget to set my system to boot from my SSD, unfortunately I cannot because of the issues mentioned above.

Thanks for your time.

Answers

Only authorized users can answer the question. Please sign in first, or register a free account.

gigglcept

Add To Favorites

Follow

Total Points: 113

Total Questions: 105

Total Answers: 125

Location: Christmas Island

Member since Wed, Jan 13, 2021

3 Years ago

answered 2 Years ago ditery · Accepted Answer

What you could try, is to install the bootloader GRUB2 on the conventional HDD, while having the root (/) partition on the SSD. You probably need to partition your hard drives manually to be able to change this setting (see this screenshot I found here - "Device for Bootloader-Installation"). By having GRUB installed on the HDD, you should be able to tell your BIOS to boot Ubuntu from the HDD, while all system files are loaded from the SSD (More accurately: You'll load approximately 440 Bytes from the HDD before everything else is loaded from the SSD).

It might nevertheless happen, that a driver is required for the SSD, and that GRUB therefore can not access the files on it. In that case, I'm afraid that you might have to put the /boot directory on a separate partition on the HDD (I'd say at least 200 MB in size - Ubuntu keeps some outdated kernels there in case an update goes wrong). This can be easily done by manually partitioning your hard drives using the normal ubuntu installer. By this, still most system data will be loaded from the SSD, only the kernel (approx 5 MB) and the initial ram disk (approx 15 MB) will be loaded from the HDD.