Wednesday, May 8, 2024
 Popular · Latest · Hot · Upcoming
0
rated 0 times [  0] [ 0]  / answers: 1 / hits: 47413  / 2 Years ago, thu, june 30, 2022, 6:02:11

My fan is blowing hard, while my cpu temperature is 32 degrees



I tried a lot of things to control my fan.



Changed grub file



GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi= pci=noacpi"


_



GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi="Linux""


Ran sensors-detect :



To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
coretemp
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!

Do you want to add these lines automatically to /etc/modules? (yes/NO)

Unloading i2c-dev... OK
Unloading i2c-i801... OK
Unloading cpuid... OK


Ran sensors:



acpitz-virtual-0
Adapter: Virtual device
temp1: +34.0°C (crit = +90.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0: +34.0°C (high = +80.0°C, crit = +90.0°C)
Core 2: +34.0°C (high = +80.0°C, crit = +90.0°C)


Ran sudo start module-init-tools and sudo start module-init-tools



module-init-tools stop/waiting


As you can see my fan isn't detected.



Running fancontrol gives me this:



Loading configuration from /etc/fancontrol ...
Error: Can't read configuration file


Can you help me, please? I cannot use my laptop now in class.



Thanks in advance.



My Ubuntu 11.10 system



00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5400 Series]
01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)


EDIT



Just installed Lubuntu and lm-sensors doesn't have any problems to detect my both my fans.


More From » fan

 Answers
0

I know the source of my problem.



After installing Lubuntu I ran sensors and this was the output:



Adapter: Virtual device
temp1: +52.0°C (crit = +90.0°C)

radeon-pci-0100
Adapter: PCI adapter
temp1: +97.5°C


Then I installed the propietary fglrx driver. The output of sensors was only



Adapter: Virtual device
temp1: +52.0°C (crit = +90.0°C)


So, the ATI/AMD fglrx driver causes the problem.


[#39767] Friday, July 1, 2022, 2 Years  [reply] [flag answer]
Only authorized users can answer the question. Please sign in first, or register a free account.
ersoggles

Total Points: 69
Total Questions: 111
Total Answers: 111

Location: Vanuatu
Member since Sun, Oct 2, 2022
2 Years ago
;