Question

5

How to get a stable WLAN-connection with a Lenovo x121e?

rated 0 times [ 5] [ 0] / answers: 1 / hits: 17795 / 2 Years ago, fri, february 18, 2022, 12:59:44

I have permament problem when using WLAN with my Lenovo ThinkPad x121e. The wireless network adapter in use is this one:

lspci:

01:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)

The connection normally works OK for some time and then starts to slow down and eventually disconnects. Sometimes the connection is reestablished seconds later, sometimes it takes 30 or more seconds, sometimes it does not reconnect at all.

This problem occures with every driver I tried up to now. Especially the kernel driver

Linux ThinkPad 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux

and Realteks driver that can be found here. The driver I'm using at the moment is the one found in this ppa: ppa:tista/x120e.

Here is another link to www.thinkwiki.org that hints at a "Low Power State" (LPS) option in realtek's driver but it seems that it cannot be disabled in the current driver.

Is there a way to get a more stable WLAN with this setup?

Some more system information:

lshw -class network:

   description: Wireless interface

   product: RTL8188CE 802.11b/g/n WiFi Adapter

   vendor: Realtek Semiconductor Co., Ltd.

   physical id: 0

   bus info: pci@0000:01:00.0

   logical name: wlan0

   version: 01

   serial: 38:59:f9:db:e6:83

   width: 64 bits

   clock: 33MHz

   capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless

   configuration: broadcast=yes driver=rtl8192CE driverversion=0006.0321.2011 firmware=56 ip=192.168.178.35 latency=0 link=yes multicast=yes wireless=802.11bgn

   resources: irq:17 ioport:3000(size=256) memory:f0200000-f0203fff

iwconfig wlan0:

wlan0     802.11bgn  ESSID:"xxx"  Nickname:"rtl8192CE"

      Mode:Managed  Frequency=2.452 GHz  Access Point: A2:05:43:2F:6E:8E   

      Bit Rate=65 Mb/s   

      Retry:on   RTS thr:off   Fragment thr:off

      Power Management period:0us  mode:All packets received

      Link Quality=100/100  Signal level=0 dBm  Noise level=-120 dBm

      Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0

      Tx excessive retries:0  Invalid misc:0   Missed beacon:0

ifconfig wlan:

wlan0     Link encap:Ethernet  HWaddr 38:59:f9:db:e6:83  

      inet addr:192.168.178.35  Bcast:192.168.178.255  Mask:255.255.255.0

      inet6 addr: fe80::3a59:f9ff:fedb:e683/64 Scope:Link

      UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

      RX packets:117385 errors:0 dropped:0 overruns:0 frame:0

      TX packets:85652 errors:0 dropped:0 overruns:0 carrier:0

      collisions:0 txqueuelen:1000 

      RX bytes:115417879 (115.4 MB)  TX bytes:10463799 (10.4 MB)

      Interrupt:17 Memory:ffffc900037a8000-ffffc900037a8100

Answers

Only authorized users can answer the question. Please sign in first, or register a free account.

nalystcul

Add To Favorites

Follow

Total Points: 390

Total Questions: 106

Total Answers: 115

Location: Tokelau

Member since Sun, May 7, 2023

1 Year ago

answered 2 Years ago otatorm · Accepted Answer

I finally fixed this problem by compiling and installing the latest drivers from Linux Wireless in Ubuntu 12.04, in my case the "compat-wireless-3.5.1-1-snpc.tar.bz2" package: http://wireless.kernel.org/en/users/Download/stable/

One needs the header files for his kernel and the build-essentials package. I recommend also to run the script "driver-select" with the option rtlwifi before compiling because one doesn't need the other drivers and it reduces building time:

sudo apt-get install linux-headers-$(uname -r) build-essential



tar jvxf compat-wireless-3.5.1-1-snpc.tar.bz2

cd compat-wireless-3.5.1-1-snpc

./scripts/driver-select rtlwifi

make

sudo make install

But the downside is you have to rebuild the driver after every kernel update.

I'm running the driver for two days now with excessive closing and opening the lid and didn't get any disconnects.