I just bought a Fusion Serie from PCSpecialist and I'm having screen issue when running Ubuntu (tested 20.04 and 21.04) or PopOS (tested 21.04)

• built-in screen display is blinking when the mouse cursor is moving within its display area using the touchpad or a mouse


• if I press the left button while moving the cursor the display does not blink


• when using an external monitor its display is fine, but not the integrated screen one (in duplicated or extended mode)


• I recorded the screen and the video is not showing the blinks (although the screen was blinking while recording)

What I tried:

• changing screens resolutions


• enabling / disabling PopOS HiDPI daemon


• use different kernels (from 5.11 to 5.14)

Here are the laptop specs:

• Chassis & Display: Fusion Studio Series : Écran large LED mat 14 pouces 90 Hz sRGB 95 % WQXGA (2880 x 1800)


• Processor (CPU): Processeur Quad Core Intel® Core® i7 11370H (3,3 GHz, 4,8 GHz Turbo)


• Memory (RAM): 16 Go Corsair 2933 MHz SODIMM DDR4 (2 x 8 Go)


• Graphics Card: Intel® Iris® Xe Graphics


• 1st M.2 SSD Drive: 500 Go SAMSUNG 970 EVO PLUS M.2, PCIe NVMe

And some commands outputs (from PopOS 21.04):

uname -r

5.11.0-7633-generic



inxi -G

Graphics:  Device-1: Intel TigerLake GT2 [Iris Xe Graphics] driver: i915 v: kernel

           Device-2: Chicony HD Webcam type: USB driver: uvcvideo

           Display: x11 server: X.Org 1.20.11 driver: loaded: modesetting

           unloaded: fbdev,vesa resolution: 1: 1440x900~60Hz 2: 1920x1080~60Hz

           OpenGL: renderer: Mesa Intel Xe Graphics (TGL GT2) v: 4.6 Mesa 21.0.1



sudo lshw -c video

*-display                

       description: VGA compatible controller

       product: TigerLake GT2 [Iris Xe Graphics]

       vendor: Intel Corporation

       physical id: 2

       bus info: pci@0000:00:02.0

       logical name: /dev/fb0

       version: 01

       width: 64 bits

       clock: 33MHz

       capabilities: pciexpress msi pm vga_controller bus_master cap_list rom fb

       configuration: depth=32 driver=i915 latency=0 mode=2880x1800 visual=truecolor xres=2880 yres=1800

       resources: iomemory:600-5ff iomemory:400-3ff irq:153 memory:601c000000-601cffffff memory:4000000000-400fffffff ioport:3000(size=64) memory:c0000-dffff memory:4010000000-4016ffffff memory:4020000000-40ffffffff



lspci -nnk | grep -iA2 VGA

00:02.0 VGA compatible controller [0300]: Intel Corporation TigerLake GT2 [Iris Xe Graphics] [8086:9a49] (rev 01)

    DeviceName: Onboard - Video

    Subsystem: Tongfang Hongkong Limited Iris Xe Graphics [1d05:1105]

Full probe of my system: https://linux-hardware.org/?probe=9361e69812

I don't really know which potential fixes I should start with therefore any help will be greatly appreciated.
Thanks

NOTE: I also have W10 installed along side PopOS and W10 is working fine.