Question

26

Ubuntu doesn't "see" external USB Hard Disk

rated 0 times [ 26] [ 0] / answers: 1 / hits: 308566 / 2 Years ago, thu, september 8, 2022, 6:38:37

It's NTFS. It's USB2. I'm using Ubuntu 13.04. It works perfectly fine on Windows (which excludes cable and hardware problems). I have two Ubuntu computers and it's not detected on either. It's about 500 GB.

Summary: video explaining the solution

Edits:

Following the first link, I input sudo lsusb in a terminal; before and after connecting the HDD. The difference was Bus 001 Device 012: ID 14cd:6116 Super Top M6116 SATA Bridge. There it is! ("sata bridge" used to appear in a windows notification when I plugged in the HDD in!). ...This means that Ubuntu detects it but is it not mounting it?

I tried this:

sudo mount /dev/sdb1 /mnt

But gives this:

mount: special device /dev/sdb1 does not exist

I also tried:

sudo mount /dev/sdc1 /mnt

but it stays with no output forever. I left it in background for about 30 min.s.

sudo fdisk -l gives out this:

Disk /dev/sda: 160.0 GB, 160041885696 bytes

255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0xa42d04a3

 Device Boot      Start         End      Blocks   Id  System

/dev/sda1              63       80324       40131   de  Dell Utility

/dev/sda2   *       80325   102481919    51200797+   7  HPFS/NTFS/exFAT

/dev/sda3       263874558   312580095    24352769    5  Extended

/dev/sda4       102481920   263872511    80695296    7  HPFS/NTFS/exFAT

/dev/sda5       263874560   310505471    23315456   83  Linux

/dev/sda6       310507520   312580095     1036288   82  Linux swap / Solaris



Partition table entries are not in disk order



Disk /dev/sdc: 500.1 GB, 500107862016 bytes

255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x5822aaea



 Device Boot      Start         End      Blocks   Id  System

/dev/sdc1            2048   976769023   488383488    7  HPFS/NTFS/exFAT

The part below "Partition table entries are not in disk order" takes about 5 minutes to appear.

The outputs of ls /dev/ | grep sd before and after connecting the HDD:

before:

sda

sda1

sda2

sda3

sda4

sda5

sda6

,after:

sda

sda1

sda2

sda3

sda4

sda5

sda6

sdd

sdd1

The second output has the lines sdd and sdd1 different from the first one.

IT SHOWED THE FILES!!

The command sudo mount /dev/sdd1 /mnt worked after I typed in sudo fdisk -l!!! Thanks a million!! :) :)

Answers

Only authorized users can answer the question. Please sign in first, or register a free account.

scrubuz

Add To Favorites

Follow

Total Points: 194

Total Questions: 96

Total Answers: 127

Location: Monaco

Member since Fri, Sep 24, 2021

3 Years ago

answered 2 Years ago jectedrin · Accepted Answer

Okay here's what worked... (Here's a video explanation)

Firstly let's check if Ubuntu detects the device:

Disconnect your device then open a terminal and input ls /dev/ | grep sd and Enter. Now connect the device and input ls /dev/ | grep sd again and Enter. Now you should have two outputs. Compare them to each other.

You should find an extra line (or two) in the second output. Keep that extra line somewhere; we'll use it later.

If you can't find a difference then I don't think my solution will work for you but you can try. Probably you have a hardware problem.

(Here's the second part of the video demonstrating what's below)

Now input sudo fdisk -l in a terminal. You should see a large output.

Wait until the "prompt" (the line that looks like user@host:~$) appears again. It might take up to 5 minutes.

When the prompt appears again now you can now "mount" the device with this command:

sudo mount /dev/sdxn /mnt

Replace sdxn by the extra line you found when we did the first step.

(example: sudo mount /dev/sdb1 /mnt)

And you're done!

Summary: To mount the hard disk again later:

sudo fdisk -l

Wait

sudo mount /dev/sdxn /mnt