In Windows it asks for username & password & in Ubuntu it asks for username, domain & password.

I entered root's and local user's password it says NOT ACCESSIBLE.

#======================= Global Settings =======================



[global]



## Browsing/Identification ###



# Change this to the workgroup/NT-domain name your Samba server will part of

    workgroup = test

    netbios name = bishwa



# server string is the equivalent of the NT Description field

    server string = %h server (Samba, Ubuntu)



# Windows Internet Name Serving Support Section:

# WINS Support - Tells the NMBD component of Samba to enable its WINS Server

   wins support = yes



# WINS Server - Tells the NMBD components of Samba to be a WINS Client

# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both

;   wins server = w.x.y.z



# This will prevent nmbd to search for NetBIOS names through DNS.

    dns proxy = no



# What naming service and in what order should we use to resolve host names

# to IP addresses

   name resolve order = wins lmhosts host bcast



#### Networking ####



# The specific set of interfaces / networks to bind to

# This can be either the interface name or an IP address/netmask;

# interface names are normally preferred

;   interfaces = 127.0.0.0/8 eth0



# Only bind to the named interfaces and/or networks; you must use the

# 'interfaces' option above to use this.

# It is recommended that you enable this feature if your Samba machine is

# not protected by a firewall or is a firewall itself.  However, this

# option cannot handle dynamic or non-broadcast interfaces correctly.

;   bind interfaces only = yes







#### Debugging/Accounting ####



# This tells Samba to use a separate log file for each machine

# that connects

    log file = /var/log/samba/log.%m



# Cap the size of the individual log files (in KiB).

    max log size = 1000



# If you want Samba to only log through syslog then set the following

# parameter to 'yes'.

#   syslog only = no



# We want Samba to log a minimum amount of information to syslog. Everything

# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log

# through syslog you should set the following parameter to something higher.

    syslog = 0



# Do something sensible when Samba crashes: mail the admin a backtrace

    panic action = /usr/share/samba/panic-action %d





####### Authentication #######



# "security = user" is always a good idea. This will require a Unix account

# in this server for every user accessing the server. See

# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html

# in the samba-doc package for details.

    security = user



# You may wish to use password encryption.  See the section on

# 'encrypt passwords' in the smb.conf(5) manpage before enabling.

    encrypt passwords = yes



# If you are using encrypted passwords, Samba will need to know what

# password database type you are using.  

    passdb backend = tdbsam



    obey pam restrictions = yes



# This boolean parameter controls whether Samba attempts to sync the Unix

# password with the SMB password when the encrypted SMB password in the

# passdb is changed.

    unix password sync = yes



# For Unix password sync to work on a Debian GNU/Linux system, the following

# parameters must be set (thanks to Ian Kahan <<[email protected]> for

# sending the correct chat script for the passwd program in Debian Sarge).

    passwd program = /usr/bin/passwd %u

    passwd chat = *Entersnews*spassword:* %n

 *Retypesnews*spassword:* %n

 *passwordsupdatedssuccessfully* .



# This boolean controls whether PAM will be used for password changes

# when requested by an SMB client instead of the program listed in

# 'passwd program'. The default is 'no'.

    pam password change = yes



# This option controls how unsuccessful authentication attempts are mapped

# to anonymous connections

    map to guest = bad user



########## Domains ###########



# Is this machine able to authenticate users. Both PDC and BDC

# must have this setting enabled. If you are the BDC you must

# change the 'domain master' setting to no

#

    domain logons = yes

    domain master = yes

;   local master = yes

    preferred master = yes

    os level = 64

#

# The following setting only takes effect if 'domain logons' is set

# It specifies the location of the user's profile directory

# from the client point of view)

# The following required a [profiles] share to be setup on the

# samba server (see below)

    logon path = %Nprofiles%U

# Another common choice is storing the profile in the user's home directory

# (this is Samba's default)



# The following setting only takes effect if 'domain logons' is set

# It specifies the location of a user's home directory (from the client

# point of view)

    logon drive = H:

;   logon home = %n%u



# The following setting only takes effect if 'domain logons' is set

# It specifies the script to run during logon. The script must be stored

# in the [netlogon] share

# NOTE: Must be store in 'DOS' file format convention

;   logon script = logon.cmd



# This allows Unix users to be created on the domain controller via the SAMR

# RPC pipe.  The example command creates a user account with a disabled Unix

# password; please adapt to your needs

; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u



# This allows machine accounts to be created on the domain controller via the 

# SAMR RPC pipe.  

# The following assumes a "machines" group exists on the system

    add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u



# This allows Unix groups to be created on the domain controller via the SAMR

# RPC pipe.  

; add group script = /usr/sbin/addgroup --force-badname %g



########## Printing ##########



# If you want to automatically load your printer list rather

# than setting them up individually then you'll need this

#   load printers = yes



# lpr(ng) printing. You may wish to override the location of the

# printcap file

;   printing = bsd

;   printcap name = /etc/printcap



# CUPS printing.  See also the cupsaddsmb(8) manpage in the

# cupsys-client package.

;   printing = cups

;   printcap name = cups



############ Misc ############



# Using the following line enables you to customise your configuration

# on a per machine basis. The %m gets replaced with the netbios name

# of the machine that is connecting

;   include = /home/samba/etc/smb.conf.%m



# Most people will find that this option gives better performance.

# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html

# for details

# You may want to add the following on a Linux system:

#         SO_RCVBUF=8192 SO_SNDBUF=8192

#   socket options = TCP_NODELAY



# The following parameter is useful only if you have the linpopup package

# installed. The samba maintainer and the linpopup maintainer are

# working to ease installation and configuration of linpopup and samba.

;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &



# Domain Master specifies Samba to be the Domain Master Browser. If this

# machine will be configured as a BDC (a secondary logon server), you

# must set this to 'no'; otherwise, the default behavior is recommended.

#   domain master = auto



# Some defaults for winbind (make sure you're not using the ranges

# for something else.)

;   idmap uid = 10000-20000

;   idmap gid = 10000-20000

;   template shell = /bin/bash



# The following was the default behaviour in sarge,

# but samba upstream reverted the default because it might induce

# performance issues in large organizations.

# See Debian bug #368251 for some of the consequences of *not*

# having this setting and smb.conf(5) for details.

;   winbind enum groups = yes

;   winbind enum users = yes



# Setup usershare options to enable non-root users to share folders

# with the net usershare command.



# Maximum number of usershare. 0 (default) means that usershare is disabled.

;   usershare max shares = 100



# Allow users who've been granted usershare privileges to create

# public shares, not just authenticated ones

    usershare allow guests = yes

    username map = /etc/samba/smbusers

;   guest ok = no

;   guest account = nobody



#======================= Share Definitions =======================



# Un-comment the following (and tweak the other settings below to suit)

# to enable the default home directory shares. This will share each 

# user's home director as serverusername

[homes]

    comment = Home Directories

    browseable = no

    writable = yes



# By default, the home directories are exported read-only. Change the

# next parameter to 'no' if you want to be able to write to them.



# File creation mask is set to 0700 for security reasons. If you want to

# create files with group=rw permissions, set next parameter to 0775.

;   create mask = 0700



# Directory creation mask is set to 0700 for security reasons. If you want to

# create dirs. with group=rw permissions, set next parameter to 0775.

;   directory mask = 0700



# By default, serverusername shares can be connected to by anyone

# with access to the samba server. Un-comment the following parameter

# to make sure that only "username" can connect to serverusername

# The following parameter makes sure that only "username" can connect

#

# This might need tweaking when using external authentication schemes

;   valid users = %S



# Un-comment the following and create the netlogon directory for Domain Logons

# (you need to configure Samba to act as a domain controller too.)

[netlogon]

    comment = Network Logon Service

    path = /home/samba/netlogon

    guest ok = yes

;   read only = yes



# Un-comment the following and create the profiles directory to store

# users profiles (see the "logon path" option above)

# (you need to configure Samba to act as a domain controller too.)

# The path below should be writable by all users so that their

# profile directory may be created the first time they log on

[profiles]

    comment = Users profiles

    path = /home/samba/profiles

;   guest ok = no

    browseable = no

    create mask = 0600

    directory mask = 0700

[printers]

    comment = All Printers

    browseable = no

    path = /var/spool/samba

    printable = yes

;   guest ok = no

;   read only = yes

    create mask = 0700



# Windows clients look for this share name as a source of downloadable

# printer drivers

[print$]

    comment = Printer Drivers

    path = /var/lib/samba/printers

;   browseable = yes

;   read only = yes

;   guest ok = no

# Uncomment to allow remote administration of Windows print drivers.

# You may need to replace 'lpadmin' with the name of the group your

# admin users are members of.

# Please note that you also need to set appropriate Unix permissions

# to the drivers directory for these users to have write rights in it

;   write list = root, @lpadmin



# A sample share for sharing your CD-ROM with others.

;[cdrom]

;   comment = Samba server's CD-ROM

;   read only = yes

;   locking = no

;   path = /cdrom

;   guest ok = yes



# The next two parameters show how to auto-mount a CD-ROM when the

#   cdrom share is accesed. For this to work /etc/fstab must contain

#   an entry like this:

#

#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0

#

# The CD-ROM gets unmounted automatically after the connection to the

#

# If you don't want to use auto-mounting/unmounting make sure the CD

#   is mounted on /cdrom

#

;   preexec = /bin/mount /cdrom

;   postexec = /bin/umount /cdrom



[mail]

    path = /home/frigate/mail

    writable = yes

    browseable = yes





[thunderbird]

    path = /home/frigate/Desktop/thunderbird

    writable = yes

    browseable = yes