My laptop was not working. Before sending it for repair, I decided to remove the hard drive (M2 SSD) and back it up as the manufacturer said they would reimage it

So I bought a caddy, put the SSD into it and tried to read it but cannot read it. Below is the output from dmesg

[ 3405.369844] usb 2-2.3: new SuperSpeed Gen 1 USB device number 12 using xhci_hcd

[ 3405.393576] usb 2-2.3: New USB device found, idVendor=7825, idProduct=a2a4, bcdDevice=15.07

[ 3405.393580] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 3405.393582] usb 2-2.3: Product: SSK Storage

[ 3405.393584] usb 2-2.3: Manufacturer: JMicron

[ 3405.393585] usb 2-2.3: SerialNumber: DB98765432111F3

[ 3405.401157] scsi host9: uas

[ 3405.402585] scsi 9:0:0:0: Direct-Access     SSK                       1507 PQ: 0 ANSI: 6

[ 3405.403645] sd 9:0:0:0: Attached scsi generic sg5 type 0

[ 3411.560919] sd 9:0:0:0: [sde] Unit Not Ready

[ 3411.560922] sd 9:0:0:0: [sde] Sense Key : Hardware Error [current] 

[ 3411.560925] sd 9:0:0:0: [sde] ASC=0x44 <<vendor>>ASCQ=0x81 

[ 3411.561695] sd 9:0:0:0: [sde] Read Capacity(16) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 3411.561698] sd 9:0:0:0: [sde] Sense Key : Hardware Error [current] 

[ 3411.561700] sd 9:0:0:0: [sde] ASC=0x44 <<vendor>>ASCQ=0x81 

[ 3411.562451] sd 9:0:0:0: [sde] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 3411.562456] sd 9:0:0:0: [sde] Sense Key : Hardware Error [current] 

[ 3411.562461] sd 9:0:0:0: [sde] ASC=0x44 <<vendor>>ASCQ=0x81 

[ 3411.562940] sd 9:0:0:0: [sde] 0 512-byte logical blocks: (0 B/0 B)

[ 3411.562942] sd 9:0:0:0: [sde] 0-byte physical blocks

[ 3411.563684] sd 9:0:0:0: [sde] Test WP failed, assume Write Enabled

[ 3411.563938] sd 9:0:0:0: [sde] Asking for cache data failed

[ 3411.563940] sd 9:0:0:0: [sde] Assuming drive cache: write through

[ 3411.564959] sd 9:0:0:0: [sde] Optimal transfer size 33553920 bytes not a multiple of physical block size (0 bytes)

[ 3411.566116] sd 9:0:0:0: [sde] Unit Not Ready

[ 3411.566124] sd 9:0:0:0: [sde] Sense Key : Hardware Error [current] 

[ 3411.566129] sd 9:0:0:0: [sde] ASC=0x44 <<vendor>>ASCQ=0x81 

[ 3411.567230] sd 9:0:0:0: [sde] Read Capacity(16) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 3411.567238] sd 9:0:0:0: [sde] Sense Key : Hardware Error [current] 

[ 3411.567245] sd 9:0:0:0: [sde] ASC=0x44 <<vendor>>ASCQ=0x81 

[ 3411.568207] sd 9:0:0:0: [sde] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[ 3411.568213] sd 9:0:0:0: [sde] Sense Key : Hardware Error [current] 

[ 3411.568216] sd 9:0:0:0: [sde] ASC=0x44 <<vendor>>ASCQ=0x81 

[ 3411.570438] sd 9:0:0:0: [sde] Attached SCSI disk

Is there anyone who might be able to tell me what those mean? It appears that there are errors but at the end it seems to recognise it as a disk

I had never used that caddy before. I don't know now what to do. Whether to try to buy a different caddy or to contact a specialist to try to recover the data. There is some data on that disk that I really want to keep