My computer at home is a bit lacking, so I want to make sure I'm getting the most out of it while I can. Generally speaking, here are the specs:
- 4GB Memory
- AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ × 2
- 64-bit Ubuntu
The terminal shows me the following:
me@home:~$ uname -a
Linux home 3.0.0-17-generic #30-Ubuntu SMP Thu Mar 8 20:45:39 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
me@home:~$ lspci | grep VGA
01:00.0 VGA compatible controller: ATI Technologies Inc RV380 [Radeon X600 (PCIE)]
me@home:~$ sudo lshw -C video
*-display:0
description: VGA compatible controller
product: RV380 [Radeon X600 (PCIE)]
vendor: ATI Technologies Inc
physical id: 0
bus info: pci@0000:01:00.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
resources: irq:44 memory:e0000000-efffffff ioport:ac00(size=256) memory:fdef0000-fdefffff memory:fdec0000-fdedffff
*-display:1 UNCLAIMED
description: Display controller
product: RV380 [Radeon X600]
vendor: ATI Technologies Inc
physical id: 0.1
bus info: pci@0000:01:00.1
version: 00
width: 32 bits
clock: 33MHz
capabilities: pm pciexpress bus_master cap_list
configuration: latency=0
resources: memory:fdee0000-fdeeffff
me@home:~$ lspci -nn | grep VGA
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV380 [Radeon X600 (PCIE)] [1002:5b62]
The additional drivers menu in System Settings shows me nothing useful and my attempt at installing ATI's Catalyst Control center (drivers that came with the video card) failed. I believe the latest version of Ubuntu at the time was 9.x.
What should I do? Install an old version of Ubuntu 9? Use some alternative driver?
UPDATE: I might try my hand at a bit from this answer next: "Installing Catalyst Manually (from AMD/ATI's site)" . From a terminal, fgl_glxgears
returns the following:
fgl_glxgears: command not found
UPDATE: Per @William's question, here is some additional output:
me@home:~$ sudo apt-get install fglrx
[sudo] password for blong:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
libkrb5-3:i386 libk5crypto3:i386 liblcms1:i386 libcupsimage2:i386
libidn11:i386 xserver-xorg-video-r128-dbg libgnutls26:i386 libtasn1-3:i386
libfreetype6:i386 libavahi-common-data:i386 libcups2:i386
libkrb5support0:i386 libgcrypt11:i386 libkeyutils1:i386 libjasper1:i386
libavahi-client3:i386 xserver-xorg-video-mach64-dbg libfontconfig1:i386
libgssapi-krb5-2:i386 libavahi-common3:i386 libgpg-error0:i386
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
fglrx-amdcccle
The following NEW packages will be installed:
fglrx fglrx-amdcccle
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/41.8 MB of archives.
After this operation, 130 MB of additional disk space will be used.
. Any thoughts?