Thursday, September 21, 2023
 Popular · Latest · Hot · Upcoming
rated 0 times [  6] [ 0]  / answers: 1 / hits: 14329  / 2 Years ago, tue, august 17, 2021, 9:58:04

The internet keeps cutting out every several minutes, sometimes it lasts longer but it happens eventually. I can still use the internet if I disconnect from the menu and click connect again. Any help would be appreciated :)

Details of my Wireless Card:

Wireless card: 04:00.0 Network
controller: Realtek Semiconductor Co.,
Ltd. RTL8187SE Wireless LAN Controller
(rev 22)

I'm just running a plain old fully up to date 64-bit Ubuntu (Kernel 2.6.38-10-generic)

How the kernel recognises my wireless card:

description: Wireless interface
product: RTL8187SE Wireless LAN Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:04:00.0
logical name: wlan0
version: 22
serial: 00:24:21:cf:89:f6
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=r8180 latency=0 multicast=yes wireless=802.11b/g
resources: irq:17 ioport:3000(size=256) memory:fa000000-fa003fff
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:05:00.0
logical name: eth0
version: 03
serial: 00:03:0d:de:97:eb
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip= latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
resources: irq:43 ioport:4000(size=256) memory:f6000000-f6000fff memory:f4000000-f4003fff memory:f4020000-f403ffff

I'm just using standard network manager, not customised anything really..

More From » 11.04


Dropped WiFi connections can either be environmental or software related.

I'll try to keep this as generic as possible, so that the answer could apply to any WiFi cards.

Three environmental areas that you should consider before delving into the software suggestions below:

  • WIFI Encryption - Try changing the encryption method on your WIFI router, see if that results in a more stable connection.

  • WIFI Router itself - Try moving to a new access point, do you still have connectivity issues?

  • WIFI Channel - Try changing the channel your router is communicating on. In your area, there may be too much traffic on the channel you selected.

Once you've ruled these areas out, five software possible avenues you could consider:

  1. Looking to see if any WiFi Backport exist and if so, installing the appropriate package

  2. See if this is a 64bit vs 32bit issue

  3. Trying a newer Kernel, either the next available stable kernel OR testing the very latest alpha/beta Ubuntu version which contains the latest release candidate kernel

  4. Disabling the power management of your wireless card

  5. (the choice of very last resort) using NDISWrapper


The kernel developers often release a software package containing updates for WiFi devices derived from the latest or most recent kernel.

For Natty, this package is called linux-backports-modules-cw-2.6.39-generic (thanks Jorge). This package can be found either in the proposed repository or in the backport repository. Tick the appropriate checkbox in Software Sources and Reload the latest updates.

Open either Software Center or Synaptic Manager and search for the package named (or similarly named) as above. If the package is available, install the package, reboot and see if the WiFi connection is more stable.

64bit vs 32bit

As linux matures, 64bit vs 32bits issues should reduce. However it is not unknown that a 64bit installation can be more unstable compared to a 32bit installation - and visa-versa.

For your card, I found a bug report for your Wireless card here that describes your symptoms - 64bit kernel, wifi drops connection randomly.

Take a backup of your system first using, for example, Clonezilla, so that you have something you can easily restore from.

Try installing the 32bit version of Natty. See if your connection is more stable. You could also test the other suggestions in this answer in this 32bit configuration.

Newer Kernel

Testing a newer Kernel can sometimes cause instability issues - for example boot and black-screen issues. I would recommend you remove any Additional Hardware graphic drivers (e.g. ATI or Nvidia) first. I also recommend that you have a good backup for example, using CloneZilla which you can restore from.

Look for the next stable mainline kernel from here on LaunchPad.

Looking at the change lists on kernel 2.6.39, it does mention some updates for your card.

You can install the 2.6.39 kernel as described in my answer here.

Disabling Power Management

Sometimes wireless cards can have Power Management modes. Its not unknown for these modes to be buggy in linux. Switching off power-management can sometimes help.

You may have to do some Google research to see if there is a specific method to disable Power Managment. Below is a method I've used in the past for some cards.

From a terminal type:

gksu gedit /etc/pm/power.d/wireless

If the file opened contains any statements then add the following line (if it doesnt already exist)

/sbin/iwconfig wlan0 power off

If the file opened is empty then add the following


/sbin/iwconfig wlan0 power off

Now copy and paste the following:

sudo chmod +x /etc/pm/power.d/wireless

Then reboot.



Note - NDISWrapper can cause black-screen issues on boot - so have a good backup for example, using CloneZilla which you can restore from.

NDISWrapper was at one time a few years ago, one frequently used method for wireless cards because the kernel had so few wireless driver support.

Its fallen out of favour in recent times for many reasons that I wont go into...

To be honest, RTL8187se has been in the kernel for some time so the following suggestion should be considered as a last resort.

Search for ndisgtk in the software center and install

Now download the windows xp drivers, in your case from Realtek

Extract from the zip file.

Using ndisgtk - navigate to the folder - RTL8187SE - WinXP and point ndisgtk to the .inf file. Hopefully now (maybe after a reboot) network manager should use this driver in preference to the RTL8187SE kernel driver - n.b. hopefully you dont have to blacklist the kernel.

[#44300] Tuesday, August 17, 2021, 2 Years  [reply] [flag answer]
Only authorized users can answer the question. Please sign in first, or register a free account.

Total Points: 437
Total Questions: 120
Total Answers: 107

Location: San Marino
Member since Fri, Jul 3, 2020
3 Years ago
afyess questions