Thursday, February 22, 2024
 Popular · Latest · Hot · Upcoming
0
rated 0 times [  0] [ 0]  / answers: 1 / hits: 2286  / 1 Year ago, thu, march 9, 2023, 4:17:44

I cannot burn any CDs (first time I've tried since upgrading to 11.10 to my memory). The media I'm using are 56x capable CD-Rs, and I'm using the same DVDrw/Bluray drive that came with my HP laptop (dv7 1020us).



Here is the output k3b (I lost the brasero output somehow):



    Devices
-----------------------
Optiarc BD ROM BC-5500S 1.83 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, BD-ROM, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW, BD-ROM] [SAO, TAO, RAW, SAO/R96R, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]

K3b::IsoImager
-----------------------
mkisofs print size result: 77112 (157925376 bytes)

System
-----------------------
K3b Version: 2.0.2
KDE Version: 4.7.2 (4.7.2)
QT Version: 4.7.4
Kernel: 3.0.0-13-generic

Used versions
-----------------------
mkisofs: 1.1.11
cdrecord: 1.1.11

cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 3 = CD-ROM XA mode 2
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'Optiarc '
Identification : 'BD ROM BC-5500S '
Revision : '1.83'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0040 (BD-ROM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM) (current)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 3299328 = 3222 KB
FIFO size : 12582912 = 12288 KB
Speed set to 2822 KB/s
Track 01: data 150 MB
Total size: 172 MB (17:08.18) = 77114 sectors
Lout start: 173 MB (17:10/14) = 77114 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 282732
Starting to write CD/DVD at speed 16.0 in dummy TAO mode for multi session.
Last chance to quit, starting dummy write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 01: 0 of 150 MB written.
Track 01: 1 of 150 MB written (fifo 96%) [buf 32%] 309.3x.
Track 01: 2 of 150 MB written (fifo 93%) [buf 65%] 351.8x.
Track 01: 3 of 150 MB written (fifo 90%) [buf 96%] 346.3x.
Track 01: 4 of 150 MB written (fifo 100%) [buf 100%] 1.6x.
Track 01: 5 of 150 MB written (fifo 100%) [buf 100%] 8.5x.
Track 01: 6 of 150 MB written (fifo 100%) [buf 100%] 8.2x.
Track 01: 7 of 150 MB written (fifo 100%) [buf 100%] 8.5x.
Track 01: 8 of 150 MB written (fifo 100%) [buf 100%] 8.2x.
Track 01: 9 of 150 MB written (fifo 100%) [buf 100%] 8.4x.
Track 01: 10 of 150 MB written (fifo 100%) [buf 100%] 8.2x.
Track 01: 11 of 150 MB written (fifo 100%) [buf 100%] 8.4x.
Track 01: 12 of 150 MB written (fifo 100%) [buf 100%] 8.2x.
Track 01: 13 of 150 MB written (fifo 100%) [buf 100%] 8.4x.
Track 01: 14 of 150 MB written (fifo 100%) [buf 100%] 8.1x.
Track 01: 15 of 150 MB written (fifo 100%) [buf 100%] 8.4x.
Track 01: 16 of 150 MB written (fifo 100%) [buf 100%] 8.1x.
Track 01: 17 of 150 MB written (fifo 100%) [buf 100%] 8.4x.
Track 01: 18 of 150 MB written (fifo 100%) [buf 100%] 8.1x.
Track 01: 19 of 150 MB written (fifo 100%) [buf 100%] 8.4x.
Track 01: 20 of 150 MB written (fifo 100%) [buf 100%] 8.1x.
Track 01: 21 of 150 MB written (fifo 100%) [buf 100%] 8.3x.
Track 01: 22 of 150 MB written (fifo 100%) [buf 100%] 8.1x.
Track 01: 23 of 150 MB written (fifo 100%) [buf 100%] 8.3x.
Track 01: 24 of 150 MB written (fifo 100%) [buf 100%] 8.1x.
Track 01: 25 of 150 MB written (fifo 100%) [buf 100%] 8.3x.
Track 01: 26 of 150 MB written (fifo 100%) [buf 100%] 8.1x.
Track 01: 27 of 150 MB written (fifo 100%) [buf 100%] 8.3x.
Track 01: 28 of 150 MB written (fifo 100%) [buf 100%] 8.0x.
Track 01: 29 of 150 MB written (fifo 100%) [buf 100%] 8.3x.
Track 01: 30 of 150 MB written (fifo 100%) [buf 100%] 8.0x.
Track 01: 31 of 150 MB written (fifo 100%) [buf 100%] 8.3x.
Track 01: 32 of 150 MB written (fifo 100%) [buf 100%] 8.0x.
Track 01: 33 of 150 MB written (fifo 100%) [buf 100%] 8.2x.
Track 01: 34 of 150 MB written (fifo 100%) [buf 100%] 8.5x.
Track 01: 35 of 150 MB written (fifo 100%) [buf 100%] 8.2x.
Track 01: 36 of 150 MB written (fifo 100%) [buf 100%] 8.5x.
Track 01: 37 of 150 MB written (fifo 100%) [buf 100%] 8.2x.
Track 01: 38 of 150 MB written (fifo 100%) [buf 100%] 8.5x.
Track 01: 39 of 150 MB written (fifo 100%) [buf 100%] 8.2x.
Track 01: 40 of 150 MB written (fifo 100%) [buf 100%] 8.4x.
Track 01: 41 of 150 MB written (fifo 100%) [buf 100%] 8.2x.
Track 01: 42 of 150 MB written (fifo 100%) [buf 100%] 8.4x.
Track 01: 43 of 150 MB written (fifo 100%) [buf 100%] 8.2x.
Track 01: 44 of 150 MB written (fifo 100%) [buf 100%] 8.4x.
Track 01: 45 of 150 MB written (fifo 100%) [buf 100%] 8.1x.
Track 01: 46 of 150 MB written (fifo 100%) [buf 100%] 8.4x.
Track 01: 47 of 150 MB written (fifo 100%) [buf 100%] 8.1x.
Track 01: 48 of 150 MB written (fifo 100%) [buf 100%] 8.4x.
Track 01: 49 of 150 MB written (fifo 100%) [buf 100%] 8.1x.
Track 01: 50 of 150 MB written (fifo 100%) [buf 100%] 8.4x.
Track 01: 51 of 150 MB written (fifo 100%) [buf 100%] 8.1x.
Track 01: 52 of 150 MB written (fifo 100%) [buf 100%] 8.3x.
Track 01: 53 of 150 MB written (fifo 100%) [buf 100%] 8.1x.
Track 01: 54 of 150 MB written (fifo 100%) [buf 100%] 8.3x.
Track 01: 55 of 150 MB written (fifo 100%) [buf 100%] 8.1x.
Track 01: 56 of 150 MB written (fifo 100%) [buf 100%] 8.3x.
Track 01: 57 of 150 MB written (fifo 100%) [buf 100%] 8.1x.
Track 01: 58 of 150 MB written (fifo 100%) [buf 100%] 8.3x.
Track 01: 59 of 150 MB written (fifo 100%) [buf 100%] 8.0x.
Track 01: 60 of 150 MB written (fifo 100%) [buf 100%] 8.3x.
Track 01: 61 of 150 MB written (fifo 100%) [buf 100%] 8.0x.
Track 01: 62 of 150 MB written (fifo 100%) [buf 100%] 8.3x.
Track 01: 63 of 150 MB written (fifo 100%) [buf 100%] 8.0x.
Track 01: 64 of 150 MB written (fifo 100%) [buf 100%] 8.2x.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 81 16 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 03 00 00 7A A3 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 31395 (valid)
cmd finished after 18.085s timeout 40s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 67678208 bytes
Writing time: 79.157s
Average write speed 13.0x.
Min drive buffer fill was 100%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.001s
/usr/bin/wodim: fifo had 1257 puts and 1067 gets.
/usr/bin/wodim: fifo was 0 times empty and 1014 times full, min fill was 90%.
BURN-Free was never needed.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=16 -tao -dummy driveropts=burnfree -multi -xa -tsize=77112s -

mkisofs
-----------------------
77112
I: -input-charset not specified, using utf-8 (detected in locale settings)
0.65% done, estimate finish Sun Oct 30 09:42:14 2011
1.30% done, estimate finish Sun Oct 30 09:39:43 2011
1.96% done, estimate finish Sun Oct 30 09:38:50 2011
2.61% done, estimate finish Sun Oct 30 09:38:25 2011
3.25% done, estimate finish Sun Oct 30 09:38:10 2011
3.89% done, estimate finish Sun Oct 30 09:38:00 2011
4.54% done, estimate finish Sun Oct 30 09:37:53 2011
5.19% done, estimate finish Sun Oct 30 09:37:47 2011
5.85% done, estimate finish Sun Oct 30 09:37:43 2011
6.49% done, estimate finish Sun Oct 30 09:37:39 2011
7.14% done, estimate finish Sun Oct 30 09:37:37 2011
7.78% done, estimate finish Sun Oct 30 09:38:00 2011
8.44% done, estimate finish Sun Oct 30 09:37:56 2011
9.09% done, estimate finish Sun Oct 30 09:37:53 2011
9.74% done, estimate finish Sun Oct 30 09:37:50 2011
10.38% done, estimate finish Sun Oct 30 09:38:26 2011
11.04% done, estimate finish Sun Oct 30 09:38:30 2011
11.69% done, estimate finish Sun Oct 30 09:38:34 2011
12.33% done, estimate finish Sun Oct 30 09:38:38 2011
12.97% done, estimate finish Sun Oct 30 09:38:33 2011
13.64% done, estimate finish Sun Oct 30 09:38:37 2011
14.28% done, estimate finish Sun Oct 30 09:38:40 2011
14.92% done, estimate finish Sun Oct 30 09:38:42 2011
15.57% done, estimate finish Sun Oct 30 09:38:45 2011
16.21% done, estimate finish Sun Oct 30 09:38:47 2011
16.88% done, estimate finish Sun Oct 30 09:38:43 2011
17.52% done, estimate finish Sun Oct 30 09:38:46 2011
18.16% done, estimate finish Sun Oct 30 09:38:48 2011
18.81% done, estimate finish Sun Oct 30 09:38:50 2011
19.47% done, estimate finish Sun Oct 30 09:38:51 2011
20.11% done, estimate finish Sun Oct 30 09:38:53 2011
20.76% done, estimate finish Sun Oct 30 09:38:50 2011
21.40% done, estimate finish Sun Oct 30 09:38:51 2011
22.06% done, estimate finish Sun Oct 30 09:38:53 2011
22.71% done, estimate finish Sun Oct 30 09:38:54 2011
23.36% done, estimate finish Sun Oct 30 09:38:56 2011
24.00% done, estimate finish Sun Oct 30 09:38:57 2011
24.64% done, estimate finish Sun Oct 30 09:38:54 2011
25.31% done, estimate finish Sun Oct 30 09:38:55 2011
25.95% done, estimate finish Sun Oct 30 09:38:56 2011
26.60% done, estimate finish Sun Oct 30 09:38:58 2011
27.25% done, estimate finish Sun Oct 30 09:38:59 2011
27.89% done, estimate finish Sun Oct 30 09:39:00 2011
28.53% done, estimate finish Sun Oct 30 09:38:57 2011
29.20% done, estimate finish Sun Oct 30 09:38:58 2011
29.84% done, estimate finish Sun Oct 30 09:38:59 2011
30.48% done, estimate finish Sun Oct 30 09:39:00 2011
31.13% done, estimate finish Sun Oct 30 09:39:01 2011
31.79% done, estimate finish Sun Oct 30 09:39:02 2011
32.42% done, estimate finish Sun Oct 30 09:39:00 2011
33.09% done, estimate finish Sun Oct 30 09:39:00 2011
33.73% done, estimate finish Sun Oct 30 09:39:01 2011
34.37% done, estimate finish Sun Oct 30 09:39:02 2011
35.03% done, estimate finish Sun Oct 30 09:39:03 2011
35.68% done, estimate finish Sun Oct 30 09:39:03 2011
36.32% done, estimate finish Sun Oct 30 09:39:01 2011
36.96% done, estimate finish Sun Oct 30 09:39:02 2011
37.63% done, estimate finish Sun Oct 30 09:39:03 2011
38.27% done, estimate finish Sun Oct 30 09:39:03 2011
38.91% done, estimate finish Sun Oct 30 09:39:04 2011
39.56% done, estimate finish Sun Oct 30 09:39:05 2011
40.22% done, estimate finish Sun Oct 30 09:39:03 2011
40.86% done, estimate finish Sun Oct 30 09:39:04 2011
41.50% done, estimate finish Sun Oct 30 09:39:04 2011
42.16% done, estimate finish Sun Oct 30 09:39:05 2011
42.81% done, estimate finish Sun Oct 30 09:39:05 2011
43.45% done, estimate finish Sun Oct 30 09:39:06 2011
44.09% done, estimate finish Sun Oct 30 09:39:04 2011
44.76% done, estimate finish Sun Oct 30 09:39:05 2011
45.40% done, estimate finish Sun Oct 30 09:39:05 2011
46.04% done, estimate finish Sun Oct 30 09:39:06 2011
46.70% done, estimate finish Sun Oct 30 09:39:06 2011
47.35% done, estimate finish Sun Oct 30 09:39:07 2011
47.99% done, estimate finish Sun Oct 30 09:39:05 2011
48.63% done, estimate finish Sun Oct 30 09:39:06 2011
49.30% done, estimate finish Sun Oct 30 09:39:06 2011
49.94% done, estimate finish Sun Oct 30 09:39:07 2011
50.58% done, estimate finish Sun Oct 30 09:39:07 2011

mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid Crossroads -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-rolandixor/k3bWr4619.tmp -rational-rock -hide-list /tmp/kde-rolandixor/k3bBz4619.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-rolandixor/k3bwD4619.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-rolandixor/k3bmN4619.tmp

mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid Crossroads -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-rolandixor/k3bYM4619.tmp -rational-rock -hide-list /tmp/kde-rolandixor/k3bll4619.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-rolandixor/k3brc4619.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-rolandixor/k3bHZ4619.tmp


Using cdrecord as the backend, I get an error (254), and it claims I may need to change the permissions (which I tried). That doesn't seem to work, and all the Google searching I've done seems useless.



I recall something about power calibration failing - but I was on my way to bed, and later to church, when I was trying to burn the CD - so I did not have the time to record what it was.






I have tried:



sudo chmod 4755 /usr/bin/wodim - no go.






BTW - the drive can read CDs just fine, though it takes forever to show what's on them (the laptop is a wee bit old (almost 4 years!), and I've kept upgrading since 8.10 or 8.04, so I think that might be the problem with the speed).






Is there a way around these errors? Or is this a hardware issue? If I need to add more debugging info, let me know.






I tried this on another system with 11.10 (another laptop) and it's fine...






(I'm experienced enough so you can ask me to do dmesg and all the jazz :D).


More From » burning

 Answers
7

For now, I am unable to check up on the status of this issue, but it seems the drive is working fine for the most part. I will probably update if anything changes (since I'm on 12.04 now).



UPDATE:



Turns out the drive laser is shot :).


[#42429] Saturday, March 11, 2023, 1 Year  [reply] [flag answer]
Only authorized users can answer the question. Please sign in first, or register a free account.
aciousoun

Total Points: 178
Total Questions: 110
Total Answers: 98

Location: Lithuania
Member since Fri, Sep 4, 2020
4 Years ago
;